6,008 found, showing page 26 of 151
$6.29
1/2x13 NC DIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$7.99
6" SLIP JOINT PLIERS
High-quality drop-forged tempered steel, deep milled. Polished chrome finish. Rust-resistant. TPR rubber over-molded grips.
View Details
$9.99
YEL SPIRAL NOTEBOOK
Notebook is conveniently sized and tough enough to survive any of Mother Nature's onslaughts. Notebook repels water, oil, grease and more. Works with Rite in the Rain all-weather pens/pencils, wax markers and crayons in wet or dry applications. Permanent markers and standard ballpoint pens work under dry conditions. Will not work with gel pens, most highlighters, fountain pens or water colors. Paper is wood-based, recyclable, and survives rain, heavy sweat, mud & grime, heat & humidity, oil & grease, sleet & snow, fog & mist. Universal page pattern allows notebook to be used for journaling or graphing. Mini ruler included on notebook cover for quick measurements. Sheet Size: 4-5/8 In. x 7 In., Overall Size: 4-7/8 In. x 7 In. x 3/8 In.
View Details
$10.99
*PLIERS 8 SLIP JNT
High-quality drop-forged tempered steel, deep milled. Polished chrome finish. Rust-resistant. TPR rubber over-molded grips.
View Details
$279.99
M18 2SPD GREASE GUN
M18 cordless 2-speed grease gun delivers maximum pressure and unmatched versatility offering 10,000 psi (pounds per square inch) max operating pressure and a pre-set grease counter that allows service and maintenance professionals dispense precise amounts of grease. The 2-speed design offers the ability to select between max pressure and max flow rate. Features on-board LED (light emitting diode) light, lock-on/lock-off trigger, and plunger rod with markings to gauge level of grease left in barrel. The stand up design and shoulder strap capability offer user convenience while limiting fatigue, and the 48 In. flexible hose offers greater accessibility when greasing hard to reach fittings. Air bleeder valve for quick priming. Tool is also compatible with a clear barrel accessory (49-16-2646). Run time - up to 10 grease cartridges per charge. Maximum flow rate of up to 10 oz. per minute. Bare tool - battery and charger not included.
View Details
$349.99
M18 2SPD GREASE GUN
The M18 cordless 2-speed grease gun delivers maximum pressure and unmatched versatility. The tool's 2-speed design offers the ability to select between max pressure and max flow rate (up to 10 Oz./minute). Other features include an on-board LED (light emitting diode) light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel. The tool's stand up design and shoulder strap capability offer user convenience while limiting fatigue. The 48 In. flexible hose offers greater accessibility when greasing hard to reach fittings. Run time is up to 10 grease cartridges per charge. Tool is compatible with a clear barrel accessory (49-16-2646). Includes M18 cordless 2-speed grease gun (2646-20), 48 In. flex hose w/spring guard, M18 compact REDLITHIUM battery (48-11-1815), M18 & M12 multi-voltage charger (48-59-1812), high pressure grease coupler, shoulder strap, hard carrying case.
View Details
$229.99
M12 BARE BAND SAW
The M12 sub-compact band saw is the most compact and lightweight cordless band saw - less than half the weight and sizecompared to a traditional deep cut band saw. Provides one-handed power and portability to electricians, maintenance professionals, and other users cutting small diameter materials. The powerful motor can cut 3/4 In. EMT (Electrical Metallic Tubing) in 3 seconds, and up to 150 cuts per charge with the XC battery. With a 1-5/8 In. x 1-1/5 In. cut capacity andlow vibration, the M12 band saw performs clean cuts on the most common small diameter metal cutting applications. Features a dual-latching lower guard that covers the blade outside the active cutting area meeting OSHA (Occupational Safety and Health Administration) guarding requirements and making the tool suitable for one-handed use. Also includes a variable speed trigger and LED (light emitting diode) light. This band saw should be used only with Milwaukee 48-39-0572 sub-compact portable band saw blades. Bare tool - battery and charger not included.
View Details
$7.69
YEL FLD FLX PKT NOTEBOOK
Pocket notebook is conveniently sized and tough enough to survive any of Mother Nature's onslaughts. Notebook repels water, oil, grease and more. Works with Rite in the Rain all-weather pens/pencils, wax markers and crayons in wet or dry applications. Permanent markers and standard ballpoint pens work under dry conditions. Will not work with gel pens, most highlighters, fountain pens or water colors. Paper is wood-based, recyclable, and survives rain, heavy sweat, mud & grime, heat & humidity, oil & grease, sleet & snow, fog & mist. Inside cover includes convenient measurement guides. Universal page pattern allows notebook to be used for journaling or graphing. Mini ruler included on the back of the notebook for quick measurements.
View Details
$12.19
PLIERS 7-1/2 GV JT
High-quality drop-forged tempered steel, deep milled. Polished chrome finish. Rust-resistant. TPR rubber over-molded grips.
View Details
$349.99
16GA BARE SAG NAILER
The M18 FUEL 16 Gauge Angled Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 16 Gauge Angled Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with our POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18 REDLITHIUM CP2.0 battery pack, this battery-powered nailer fires up to 800 nails per chargeand is fully compatible with all M18 REDLITHIUM batteries. The MILWAUKEE M18 FUEL 16 Gauge Angled Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cord
View Details
$19.49
3PC PLIERS SET
Economy priced hand tool set. Drop-forged carbon steel. Hardened and tempered jaws with heat-treated wire cutter. Fully polished. Double dipped cushion-grips. Includes 6 In. (inch) long nose, 6 In. diagonal cutting, and 7 In. linesman pliers. Carded.
View Details
$18.99
2-3/8"HOLE DOZER HOLESAW
Features Rip Guard - each tooth is built with more steel behind the cutting edge for added strength. The added tooth strength along with 8\% cobalt gives added life to the teeth, allowing for increased productivity as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cut for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use universal Quick-Change Arbors. For use with mild steel, stainless steel, cast iron, aluminum.
View Details
$13.49
10" GROOVE JOINT PLIERS
High-quality drop-forged tempered steel, deep milled. Polished chrome finish. Rust-resistant. TPR rubber over-molded grips.
View Details
$12.99
6-1/2" COPING SAW
6-1/2" coping saw with finished hardwood handle and heavy-duty highly polished thick rust-resistant nickel plating. Frame size 3/16" x 3/8" with a 6-1/2" depth cut. 360 deg. adjustable blade.
View Details
$164.99
M12 3/8" RATCHET (TOOL ONLY)
The M12 cordless lithium-ion ratchet is the ideal tool for auto mechanics, maintenance and repair professionals looking for maximum performance and productivity in a subcompact cordless tool. It utilizes a powerful 12V motor to produce up to 35 Ft./Lb. of torque and 250 rpm (revolutions per minute) giving users the power and speed of a pneumatic ratchet without the air hose. The ratchet is tool-belt portable and features a 3/4 In. low-profile head design for work in the tightest of spaces and engine bays. The variable-speed metal trigger and reinforced steel housing provide maximum control and durability with any application. On-board fuel gauge helps monitor the charge precisely for less downtime on the job. Built-in LED (light emitting diode) light illuminates work surfaces in dark locations. REDLINK intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Bare tool - battery and charger not included.
View Details
$11.79
1/4" HOLE SAW ARBOR
Durable hardened steel construction arbor with round shank.
View Details
$179.99
17PC COMBINATION WRENCH
17-piece extra-long standard combination wrench set. Red color band denotes SAE measurement for easy identification. Chrome vanadium steel. Fully polished for professional appearance. Canvas carrying pouch. Lifetime warranty. Includes 1 each: 1/4 In., 5/16 In., 11/32 In., 3/8 In., 7/16 In., 1/2 In., 9/16 In., 5/8 In., 11/16 In., 3/4 In., 13/16 In., 7/8 In., 15/16 In., 1 In., 1-1/16 In., 1-1/8 In., and 1-1/4 In.
View Details
$14.49
*PLIERS 12" GV JNT
High-quality drop-forged tempered steel, deep milled. Polished chrome finish. Rust-resistant. TPR rubber over-molded grips.
View Details
$5.39
ARW T25 9/16" CRWN CBL STAPLE**
Round head staples for use with Arrow staple gun model No. T25, T2025, and ET2025.
View Details
$15.99
ALL WEATHER PEN
Rite in the Rain all-weather durable rubberized plastic clicker pen contains permanent black ink that will write through water, grease, and mud. The pressured cartridge can write sideways and upside down, on wet paper, and through extreme conditions from -30 Deg. F to 250 Deg. F. Ink will not leak or evaporate. 5-3/8 In. long. Includes plastic pocket clip.
View Details
$54.99
5-1/2"HOLE DOZER HOLESAW
Features Rip Guard - each tooth is built with more steel behind the cutting edge for added strength. The added tooth strength along with 8\% cobalt gives added life to the teeth, allowing for increased productivity as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cut for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use universal Quick-Change Arbors. For use with mild steel, stainless steel, cast iron, aluminum.
View Details
$199.99
2PK 3.0 M18 BATTERY
Lithium-ion battery powers Milwaukee M18 cordless tools. Provides up to 2X more run-time, 20\% more power, and twice the recharges compared to a standard lithium-ion battery. Features REDLINK intelligence overload protection to prevent damage to power tool in heavy-duty situations, and discharge protection prevents cell damage. Temperature management system and individual cell monitoring help maximize battery life. Operates cooler in extreme job site conditions and performs in climates below 0 degrees Fahrenheit with fade free power. Displays remaining runtime for less downtime on the job.
View Details
$18.99
3PC PLIERS SET
Economy priced hand tool set. Drop-forged carbon steel. Hardened and tempered jaws with heat-treated wire cutter. Fully polished. Double dipped cushion-grips. Includes 10 In. (inch) groove joint, 6 In. long nose, and 6 In. diagonal cutting pliers. Carded.
View Details
$5.49
2PK ALL-PURP RAPIDFUSE
RapidFuse all-purpose adhesive provides a fast-setting, professional-strength, clear bond that is stronger than polyurethane glues and without the expanding foam or dripping glue. Bonds virtually everything including plastic, wood, rubber,metal, ceramics, glass, fabric, stone, tile and more. Sets in 30 seconds and cures in 30 minutes - no clamps required. 40 minute open time. Soap and water cleanup before cure, after cure use mineral spirits or scrape. Water resistant formula is ideal for both interior and exterior use.
View Details
$50.00
20V MAX PROJECT KIT (TOOLS ONLY)
Includes 20V MAX lithium-ion cordless drill for a variety of home projects. Compact and lightweight design allows usersto carry out drilling tasks in confined spaces with ease. The 11-position clutch prevents stripping and overdriving screws. LED (light emitting diode) work light illuminates the surface for easier drilling in dark places. Project kit also includes 1.5 Ah 20V MAX lithium-ion battery, charger, storage bag, tape measure, adjustable wrench, needle nose pliers, (2) manual screwdrivers, utility knife, slip joint pliers, 12 Oz. hammer, ratcheting screwdriver, (4) hole saws with mandrel, (32) screwdriving bits, magnetic bit holder, (10) drilling bits, (5) spade bits.
View Details
$6.29
1/4x28 NF DIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$22.49
7-1/4" 60T ULT FIN BLADE
Milwaukee's wood cutting blades maximize life and cutting efficiencies to improve productivity. Anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100\% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. Thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool. Cobalt infused tungsten carbide. 12 In. blades are ring tensioned to further stabilize the blade. Great for use with softwoods, hardwoods, melamine, MDF, veneered plywoods, paneling and moldings.
View Details
$6.29
5/16x24 NFDIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$6.29
3/8x24 NF DIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$7.99
ALL-PURP RAPIDFUSE BRUSH
RapidFuse all-purpose adhesive provides a fast-setting, professional-strength, clear bond that is stronger than polyurethane glues and without the expanding foam or dripping glue. Bonds virtually everything including plastic, wood, rubber,metal, ceramics, glass, fabric, stone, tile and more. Sets in 30 seconds and cures in 30 minutes - no clamps required. 40 minute open time. Soap and water cleanup before cure, after cure use mineral spirits or scrape. Water resistant formula is ideal for both interior and exterior use.
View Details
$6.29
7/16x20 DIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$186.00
20V BRSHLS IMPACT DRIVER
Brushless motor delivers more run time over brushed. Ergonomic comfort grip handle reduces user fatigue and increases balance and control. Compact and lightweight design allows the tool to be utilized in tight areas. Three onboard LED (light emitting diode) lights with 20-second delay after trigger release provide visibility in dark areas. Includes DCF787 brushless cordless impact driver, 20V MAX 1.5 Ah battery, charger, soft case.
View Details
$6.29
1/2x20 NF DIE HEX MACHINE
Ideal for maintenance and repair work. Recommended for use with a hexagon die stock. Die can be used with a wrench or socket when space is limited.
View Details
$19.99
25 COMPACT AUTOLOCK TAPE
Heavy-duty tape measure features nylon blade protection, 3-rivet hook, and a 5-point reinforced frame to resist damage and increase protection when dropped. Features fractional scale for easy reading and optimized hook designed for scoring. For convenience, tape offers stamped steel belt clip and lanyard hole.
View Details
$48.99
22" CASE BOX W/ CLEAR LID
Keep accessories and supplies securely stored with this ToughSystem Organizer. Fully compatible with the ToughSystem storage line. Includes four large and eight small removable cups. Clear lid made of polycarbonate for resistance and full content visibility. Stacking side latches allow attaching additional organizers or other ToughSystem modules. Durable structural foam box walls give robust structure. Integrated water seal for protection from the environment. Robust anti-rust metal latches. Fits metal carrier DWST08210 and can be secured by its central locking mechanism.
View Details
$5.29
8" 8/12T SAWZALL BL
Sawzall blade designed to maximize general purpose cutting performance. Double relief angle reduces tooth stress for long life. Precision forming process creates sharper teeth for fast cutting. Matrix II bi-metal teeth for greater durability. 1/2" universal shank.
View Details
$27.99
10" ADJ SPUD WRENCH
Crescent Adjustable Construction Wrenches feature a round, tapered tang for easy alignment of bolt holes. A large knurlallows for easy adjustment and a tight-fitting hex jaw design reduces slippage and tightly grips the fastener for solid, secure operation. Tension spring stabilizes jaw and allows easy knurl adjustment. Proportioned dimensions optimize strength and minimize weight. Heat-treated forged alloy steel for toughness and durability. Laser etched scale in both SAE Standard and Metric sizes allows easy identification. The corrosion-resistant black oxide finish helps prevent rust. This is the ideal wrench for any iron or steel worker's tool box.
View Details
$9.99
1/2" CENTER PUNCH
Finest domestic alloy steel. Target head makes accurate hole starting easier. Sharp points ground and heat-treated for long life.
View Details
$7.49
4PK CLEAR GRIP MINIS
Gorilla Clear Grip is a flexible, fast-setting, crystal clear contact adhesive that creates a strong permanent bond. Adhesive is sandable, paintable, washer/dryer safe, waterproof, and UV (ultraviolet) resistant making it great for projects both indoors and outdoors. No-run formula bonds metal, glass, fabric, wood, ceramic, leather, paper, plastic and more.Safe to use with photos. Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use onfood contact surfaces. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
View Details
$72.99
10" 60T+40T COMB BLADE
Milwaukee circular saw blades provide longer life, increased accuracy and cooler cuts in wood cutting applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature laser cut vibration slots to reduce wobble and warping. With an anti-friction coating, the blades resist corrosion and gumming. Milwaukee's circular saw blades are optimized for cordless and corded performance.
View Details
